19 min read
Selling CE Credits That Expire: Certificates, Renewal Reminders and Recertification
Short answer: to sell CE credits that expire, you need four things in one system: a certificate with an issue date and an end date, a public page where anyone can check it, reminders that reach the holder before the end date, and a record you can hand to an auditor. Learnomy covers the first three out of the box and gives you the data for the fourth. It does not reissue a credential or re-enrol anyone by itself when one expires. The holder has to take the recertification course again, and you plan the nudges around that.
That is the whole picture in four sentences. The rest of this guide shows how an association or training provider can run the programme, what to set up before launch, how to word and time the reminders, how to price the renewal, and what records to keep. We make Learnomy, so we have an interest here. Where the product stops, we say so plainly, because a renewal programme built on a feature that does not exist is a bad Monday for everyone.
Key takeaways
- A certificate template in Learnomy can be set to expire after a number of days. Every certificate issued from it then carries an end date.
- Holders get a reminder email about 30 days and again about 7 days before the end date, then an expired notice on the day. Each email can be reworded or switched off.
- Anyone can check a certificate at its public verification page. After the end date that page says the certificate has expired.
- Nothing is reissued automatically. A holder renews by finishing the course again, and you decide how that course is priced.
- A 90-day first notice is not built in. Plan for it through a developer setting or your own email tool.
How do CE credits that expire actually work?
A CE credit is a record that a person completed a set amount of learning, usually counted in hours, units or points. A professional body, a licensing board or an employer decides how many are needed and over what period. The learner earns them by taking approved courses, and the body wants proof. CE, CPD and CPE are the same idea under different names, used in different professions and countries.
There are two common ways the clock runs. In the first, the credential itself expires: you complete a course, you hold a certificate, and after one, two or three years that certificate lapses unless you renew it. In the second, a person must collect a number of credit hours inside a reporting cycle, and the credential stays valid only if the total is reached. Many programmes mix both. A provider sells the course, the learner receives a certificate with hours printed on it, and the body checks the hours at the end of the cycle.
We are not going to describe any one regulator’s rules. They differ by profession, by country and sometimes by state, and they change. What stays the same across all of them is the paperwork question an auditor asks: who took what, when, for how many hours, and can you show it has not been altered since. Your system needs to answer that without someone digging through a spreadsheet.
Programmes usually go wrong at a hand-off: the learner cannot find the certificate, the verifier cannot confirm it, or the provider forgot to tell the learner it was about to lapse. The setup below is aimed at those three gaps.
What does a CE programme with expiring credentials need?
Before we look at Learnomy screens, here is the checklist we would use for any expiring-credential programme, on any platform. Use it to judge your current setup, whatever it is.
| What you need | Why an auditor or learner cares | How Learnomy handles it |
|---|---|---|
| Certificate with issue date and end date | The end date is what makes the credential expire | Turn on “Certificates expire” on the template and set the number of days it stays valid |
| Hours or credit value on the certificate | The body counts hours, not course titles | Hours is one of the template merge tags, and a developer can add a custom tag such as credits |
| Public verification | A third party must confirm it without a login | Every certificate has a permanent public page with the recipient, course, issue date and credential ID |
| Tamper evidence | A copy edited after issue must fail the check | Each certificate is signed with Ed25519, so an edited copy fails |
| Reminders before expiry | People forget; late renewals cost you members | Built-in emails about 30 and 7 days out, plus an expired notice |
| A way to renew | The learner needs an obvious next step | A Renew button on the certificate and on the finished course page |
| A list of who is lapsing | You chase people and report to the body | Certificates list with Expires column and Expired and Expiring soon filters |
| Revocation with a reason | Mistakes and fraud happen | Revoke one or many, with a private reason saved on each |
| Exportable records | The audit file lives outside your site too | CSV exports of students, transactions and the question bank, plus analytics |
| Automatic re-enrolment on expiry | Nice to have, saves admin time | Not available today. Plan it as a reminder and a manual or scripted step |
Everything in the “How Learnomy handles it” column comes from the Learnomy documentation and product pages as they stand today. The last row is the one we want you to read twice. We cover it properly further down.
How do you issue a certificate with an expiry date?
In Learnomy, you design a certificate template once, switch on expiry on that template, and attach it to a course. From then on every learner who completes the course gets a certificate that ends after the number of days you chose. The certificate is issued the moment the completion is recorded, with no admin action.
Here is the setup in the order we would do it.
- Pick or design a template. Learnomy ships with four ready-made templates, two for course completion and two for quiz completion, and a canvas designer under Learnomy > Certificates if you want your own look. You can add your logo, a signature block with a name and title, text, lines and a QR code.
- Print the facts a body cares about. Merge tags fill in at issue time: student name, course name, issue date, credential ID, site name, instructor name, score and hours. If your accrediting body wants a credit figure in its own wording, the docs show a short filter that adds your own tag, for example one for CEU credits. That is a small job for a developer, not a setting.
- Turn on “Certificates expire”. In the template designer, switch it on and set Valid for in days. One year is 365, two years is 730. Changing it later applies to certificates issued afterwards, not to ones already out there.
- Attach the template to the course. Open the course, find Completion and certificate, tick Award a certificate on completion and pick the template.
- Check the completion rule. A course set to manual completion never issues a certificate by itself, even at 100 percent progress. For CE courses we usually tie completion to lessons plus a final quiz with a pass mark.
- Test it as a student. Enrol a second account, finish the course, and look for the certificate on the account page. Then open its verification link in a private window.
One honest note on the PDF. The documentation lists the merge tags above and says each certificate carries an end date, and the verification page shows the expired state. It does not list the expiry date as a merge tag you can print on the PDF. If your body requires the end date printed on the certificate face, check a test certificate on your own site before you promise it, and ask us if it needs a custom tag.
How can someone verify a certificate without logging in?
Every certificate gets a permanent public page at an address ending in /verify/ followed by a unique ID. Nobody needs a login or an account. The page shows the recipient, the course, the issue date, the credential ID and a status badge. If the certificate has been revoked, it says so. If the ID does not match anything, it says that instead.
Three details make this useful for an audit file.
- It is signed. Each certificate is signed with an Ed25519 signature, and Learnomy also keeps a SHA-256 hash of each one in a local registry on your site. An edited copy fails the check.
- A QR code can sit on the certificate. If your template includes the QR element, a printed or downloaded PDF links straight back to its verification page.
- It survives course changes. If you later delete or retire the course, the certificate stays valid and verifiable. Only the course name display changes.
When a certificate passes its end date, the documentation says the verification page states that it has expired. That is the behaviour a verifier needs: the link a learner pasted onto a CV two years ago does not quietly keep saying “valid”.
Pro adds Open Badges 3.0 and Credly. Open Badges 3.0 is an industry standard for portable digital credentials. Credly pushes a badge to the learner’s Credly account when the certificate is issued. Most CE programmes do not need either one to start, and the PDF plus the verification page is enough for the typical audit. If your members live on Credly, it is worth adding later. Our sister-brand write-up on issuing course certificates on WordPress that people can verify goes deeper on the verification side if you want a second view.
How do you remind people before a credential expires?
Learnomy sends the first two reminders itself. A daily job emails the holder about 30 days before the end date and again about 7 days before, once each. If a certificate was issued with less time to run than that, the holder gets one reminder. On the end date the certificate is marked expired and the holder gets a “Certificate expired” email. No expired email goes out for a certificate that was already renewed.
You can reword both emails or switch them off under Settings > Emails, and learners can stop them through the course completion email preference in their account. The reminder timing is also adjustable by a developer through a documented setting, learnomy_certificate_reminder_cadences, which defaults to 30 and 7 days. The renewal window, the stretch before the end date when the Renew button appears, defaults to 30 days and has its own setting.
What does a 90, 30 and 7 day schedule look like?
Most renewal programmes work well with three touches, and each one has a different job. The point is to stop the learner treating renewal as a last-minute chore.
| When | Job of the message | Who sends it |
|---|---|---|
| 90 days before | Heads-up. Say the date, say what renewal involves, link to the course page and any early-renewal price. | Your email or CRM tool, or a developer-set cadence. Not built in by default. |
| 30 days before | Action. The Renew button is now live. Make it the only thing the email asks for. | Learnomy, built in |
| 7 days before | Last call. Short, plain, one link. Say what happens on the end date. | Learnomy, built in |
| On the end date | Notice that it has expired, and the route back. | Learnomy, built in |
| 30 days after | Win-back. Offer help, not blame. A late-renewal price if you have one. | Your email or CRM tool |
If you want the 90-day notice, you have three honest options. The first is to ask a developer to add 90 days to the cadence setting, then test it on a staging copy before relying on it, since the docs only show the 30 and 7 day defaults. The second is to send it from your own email or CRM tool, using a list you build from the Certificates screen. The third is a simple monthly habit: open Learnomy > Certificates, sort by the Expires column, and send a short note to anyone within 90 days. For a few hundred holders the third option is perfectly good. For thousands, use the first two.
How does a learner renew, and what does Learnomy not do?
A learner renews by finishing the course again. From 30 days before the end date, and at any time after it has expired, they see a Renew button on the certificate and a Renew certificate button on the finished course page. Pressing it reopens the course for them, even if the course does not normally allow retakes. When they finish it, they get a new certificate with a fresh end date, and the old one is closed as expired and keeps its verification link.
Here is the limit, in plain words. Learnomy does not yet renew or re-enrol anyone automatically when a credential expires. Opening a finished course after the end date does not create a new certificate. Nobody is moved into a fresh enrolment on the day it lapses. The course has to be finished again, and the learner has to start it. We would rather say that clearly than have you find out in month thirteen.
So here is the workaround we would use, built only from documented parts.
- Set the expiry on the template so every certificate has an end date.
- Let the built-in reminders run at 30 and 7 days, and add your own 90-day and post-expiry emails from your email or CRM tool.
- Point every email at the Renew button or, for people who cannot find it, at the course page.
- Review the Certificates list each month using the Expiring soon and Expired filters. That screen is your chase list.
- Decide how the renewal course is sold (next section) so there is a clear price and a clear route.
If you need true re-enrolment on a schedule, that is custom work. It is possible with the REST API and webhooks, and we can scope it, but we would not describe it as a feature of the plugin today.
How should you price a recertification course?
Price renewal as a product of its own, not as a footnote on the original. The learner already knows you, so the job of the price is to feel fair and to make late renewal slightly less attractive than on-time renewal. We cannot tell you the right number for your profession, but we can show the choices.
Learnomy sells inside WordPress with built-in Stripe and PayPal checkout, coupons and membership plans. The documentation does not describe a payment step inside the Renew button itself. It reopens access the learner already has. So if you want to charge for recertification, the clean route is to sell it as its own course, or fold it into a plan, rather than expecting the button to bill anyone.
| Model | How it works | Best when |
|---|---|---|
| Separate recertification course | A shorter course with its own price and its own completion rule, awarding the same credential | Credential content changes each cycle, or renewal is shorter than the original |
| Same course, sold again | The learner retakes the original and pays the standard price | The whole course must be repeated and you have no renewal discount |
| Annual membership | A plan that gives access to the renewal course and other CE content for a year | You sell many hours of CE and want predictable income |
| Free renewal with a paid first purchase | The renewal course costs nothing for current holders | Renewal is a retention tool, or the body requires only a short refresher |
Can you give an early-renewal or late-renewal price?
Yes, with coupons. Learnomy coupons can be a percentage or a fixed amount, with a start date, an optional expiry date, a cap on total redemptions and a per-user maximum. That gives you the standard pattern: send an early-renewal code in the 90-day email that expires at the 30-day mark, and a smaller late code after the credential has lapsed.
As an example only, with made-up figures: if the first course costs 400 and the recertification course costs 180, an early-bird code for 20 percent off at 90 days brings the on-time price to 144. A learner who waits until after expiry pays the full 180. The gap is small enough not to feel punishing and large enough to move people earlier. Your own numbers will differ, and the right ratio depends on how much new content the renewal includes.
What if you sell to employers, not individuals?
A lot of CE and compliance training is bought by a company for its staff. Learnomy Pro has Learning Spaces for this: a company buys a bundle of seats or a team plan, a manager invites people by CSV or a link, and the manager follows progress and exports a completion report without needing a WordPress login. Because certificates can expire, one sale becomes a renewal sale the following year, which is the part of the model most providers care about. Check the current Pro pricing on learnomy.app against how many seats you expect to sell. For the training-and-compliance angle, the Learnomy page on corporate training sets out what a team manager sees.
What records do you need to keep for an audit?
Keep whatever your accrediting body asks for, and keep it for as long as they ask. We cannot name that period for you, because it differs by body. What we can say is which records an auditor typically wants, and where each lives in Learnomy.
| Record | Where it lives | Gap to cover yourself |
|---|---|---|
| Certificate with ID, dates and signature | Certificates list and each public verification page | None for the record itself; export a copy of the list on a schedule |
| Who completed what, and when | Certificates list, student records, analytics with CSV export | Save a dated export outside the site each quarter |
| Quiz result against a pass mark | Quiz statistics and the gradebook, with a CSV export of the gradebook in Pro | Export scores before retiring or migrating any old system |
| Payment record | Transaction ledger and CSV export | Match to your accounting system |
| Revocations and reasons | Certificates list, with a private reason saved on each | None; the reason is private to admins by design |
| Verification activity | A count and a last-checked time on each certificate, via the REST API or WP-CLI | Review for unusual spikes |
| Course content and version | The course itself | Keep a dated copy of each version you issued credit for |
To be plain about it: Learnomy gives you the data and the exports. It does not produce a report in an auditor’s own template, and the corporate training page on learnomy.app says the same. You shape the final report. If your body requires a specific form, build that as a saved export or a short script once, then reuse it.
Two habits protect you more than any setting. First, keep an off-site copy of the exports. A record that lives only on the site it describes is only as safe as that site. Second, never delete a course you issued credit for without exporting what you need first. Learnomy keeps certificates valid and verifiable after a course is deleted, but your own file of what the course taught should not depend on that.
What if you are moving from another LMS?
Be careful with dates. A migration that stamps everything with the import day produces a wrong answer on a document someone may show an auditor. Learnomy’s importer keeps the original completion dates on lessons and courses since version 2.1.4, and a certificate issued for that completion carries the same date. Existing certificates from the old system are not migrated, and neither are old quiz scores, so export those first. We cover the full list in our guide on migrating from LearnDash to Learnomy.
What should you launch with, and what can wait?
Resist the urge to switch everything on at once. A small, tested programme beats a clever broken one. Here is the order we would use.
Before the first sale
- One course with a real completion rule and a pass mark.
- One certificate template with expiry on and the facts your body needs printed.
- A test run end to end: finish, find the certificate, verify it in a private window.
- The two built-in reminder emails reworded in your voice.
- Your refund and retake terms written down in plain words.
After launch, add the recertification course, your 90-day and post-expiry emails, a monthly look at the Expiring soon and Expired filters, and a scheduled off-site export. If you want the build in step-by-step order, our guide to creating an LMS website in WordPress covers installation, payments, quizzes and certificates before you add the expiry layer.
When is this not the right setup?
We would rather you hear it from us. Learnomy is a good fit for a provider that wants to own its course site, issue verifiable certificates and run renewals with a mix of built-in reminders and its own emails. It is a weaker fit in a few cases.
- Your body requires its own credit-tracking system. Some licensing bodies run a central portal and require providers to report into it. Learnomy can export your data, but it does not connect to every body’s portal.
- You need fully automatic re-enrolment and renewal billing on expiry. That is not built in today. Custom work can approximate it.
- You need an auditor-format report out of the box. You get exports, not a template.
- You need per-state or per-country credit rules applied by the software. Learnomy prints hours and dates. It does not know the rules of any regulator.
Try the certificate flow on a test site
Learnomy is free to start, with Pro for the institution features. Build one course, one expiring certificate and one test learner, then open the verification link in a private window. That one loop tells you most of what you need to know. Details and downloads are on learnomy.app, and the certificate setup is documented in the Learnomy certificates guide.
Frequently asked questions
Can Learnomy issue certificates that expire?
Yes. Switch on “Certificates expire” on a certificate template and set how many days it stays valid. Every certificate issued from that template carries an end date. Changing the setting later affects only certificates issued afterwards.
Does Learnomy send renewal reminders?
Yes. A daily job emails the holder about 30 days and 7 days before the end date, and sends an expired notice on the day. You can reword or turn off each email. A 90-day first reminder is not built in, so use your own email tool or ask a developer to adjust the cadence setting.
Does Learnomy re-enrol people automatically when a credential expires?
No. A holder renews by finishing the course again, using the Renew button that appears from 30 days before the end date. Nothing is reissued or re-enrolled automatically, so plan reminders and a clear renewal route around that.
Can an employer verify a certificate without an account?
Yes. Every certificate has a public verification page that needs no login. It shows the recipient, course, issue date, credential ID and status. After the end date it states that the certificate has expired.
Can I put credit hours on the certificate?
Yes, hours is one of the certificate merge tags, filled in when the certificate is issued. If your body uses its own term, such as CEUs, a developer can add a custom tag using the documented filter.
How do I charge for recertification?
Sell it as its own course or as part of a membership plan, using Learnomy’s built-in Stripe and PayPal checkout. Coupons with start and end dates let you offer early-renewal prices. The Renew button reopens access the learner already has, so it is not a payment step.
Can I see who is about to lapse?
Yes. The Certificates screen in wp-admin has an Expires column and filters for Expired and Expiring soon, with the renewal window set to 30 days by default.
Where to go from here
You do not need to build the whole programme in a week. Set up one course with an expiring certificate, test the verification link, reword the two built-in emails, and write the 90-day message in your own tool. That is a working renewal programme with an honest gap in it, and you can close the gap later if the volume justifies it. If you want our team to set up the certificate flow or scope a scripted re-enrolment, get in touch through wbcomdesigns.com. You can read more about the product on the Learnomy certificates page.
Related reading